SOYO SY-KT600 Dragon plus
AMD Socket-A AthlonXP, Athlon & Duron, designed based on the VIA KT600 Chipset ATX Motherboard Supporting up to 400 MHz FSB, DDR400/333, 6-ch audio, 8X AGP, overclock capability, multiple-boot choices, 10/100 Mbps LAN, USB 2.0, Serial ATA
Supported Processors:
* 462 pin Socket A supports AMD K7 processors, Athlon XP (1800+ - 3200+), Duron ( 1.3GHz - 1.8 GHz ).
Special Features:
* Serial ATA port supports RAID 0,1, JBOD
* Onboard 10/100 Ethernet Function
* Embedded AC97 CODEC to provide 6 channels audio solution
* Supports 8X AGP
* Advanced Management Capabilities
* Keyboard Power On, LAN/Ring Power On, Power On by Alarm.
* Multiple-boot choice
* Supports on-board Hardware Monitor and include Hardware Health Utility to streamline your PC System Management
* FSB 400: Supports 400 MHz front side bus
* Supports USB 2.0: USB 2.0 is the latest connectivity standard which delivers transfer speed up to 480Mb/s for data transfers
Chipset:
* VIA KT600
FSB:
* 400/333/266/200 MHz
Main Memory:
* 2 x 184-pin DIMM socket support up to 2 GB
* Support two 2.5V DDR SDRAMs (400/333/266)
Expansion Slots:
* 1 x AGP 8X slot (supports 8x/4x modes)
* 5 x PCI slots
* 1 x CNR slot
Storage:
* Supports Ultra DMA133/100/66 IDE devices, data transfer rate up to 133 Mb/s
Audio:
* On board 6-channel audio CODEC
LAN:
* 10/100 Mbps Fast Ethernet controller
BIOS:
* AMI BIOS with ACPI 1.0 function
* Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
* 2 Mbyte Flash ROM
Health Monitoring Description:
* On board voltage monitors
* CPU fan speed monitor
* CPU temperature monitoring
IDE Description:
* 2 channels Parallel ATA IDE ports
* 2 channels Serial ATA IDE ports
* Supports RAID 0, 1 (Serial ATA)
* Supports up to PIO mode 5 & Ultra DMA 100/133
Rear Panel I/O:
* 1 x PS/2 keyboard & PS/2 mouse connectors
* 4 x USB2.0 Ports
* 1 x RJ45 LAN connector
* 1 x EPP/ECP mode Parallel port (LPT1)
* 1 x 16550 high-speed Serial port (COM1)
* 1 x Audio ports (Line-in, Line-out, Mic-in)
Internal I/O Connectors and Headers:
* Supports Plug and Play function
* 1 x 20-pin ATX Power Supply Connector
* 4-pin ATX 12V Power Supply connector
* 1 x Floppy connector supports 360K~2.88M Bytes, 3 Mode FDDs or LS120
* 2 x IDE connectors - support four IDE devices
* 1 x IrDA/SIR Header, 1 x CD-in header
* 2 x USB 2.0 header support additional 4 USB ports
* 1 x Front panel switch/LED header
* 1 x Front panel audio header
* CPU, power and chassis Fan headers
* HDD LED, Reset Switch, Power Switch headers
Form Factor:
* ATX (305mm*190mm)
For more info click HERE
Also included:
* Bonus 4-in-1 CD
* One (1) 34-pin FDD cable
* One (1) 80-pin HDD cable
* One (1) S-ATA cable
* Thermal paste
* I/O back plate
|
|